facebook pixel
cost guide icon

Sliding Patio Door Cost

The average cost of installing a sliding patio door is $1,500 - $2,000.

In this guide

How to measure for a sliding patio door
Right-hand vs left-hand
Types of doors
Types of panes
Labor and installation process
ENERGY STAR Certified patio doors
Enhancement and improvement costs
Additional considerations and cost

How much does it cost to install a sliding patio door?

A sliding patio door is a glass door, half of which is fixed in place and half which slides over the fixed portion. Patio doors are installed because they are a source of natural light into a house or room and they provide easy access to your porch, backyard, deck, or pool. Patio doors are great to install as they provide a great level of security, weather protection, and a beautiful appearance.

The project cost is dependent on many factors such as the material, door type, pane, and brand. The average project to install a 6'-wide sliding patio door averages $1,500 - $2,000 for the project. This price includes the door, installation fees, and additional costs such as locks and door pane.

How to measure for a sliding patio door

If you are replacing an existing sliding patio door or installing a new door, one of the most important steps is to correctly measure for your new door so that it will fit properly. Sliding patio doors often come in standard sizes so it shouldn’t be too complicated to order a door that will fit. The typical patio door opening is 6'8" tall and 6 to 12 feet wide.

To measure your patio sliding door opening for replacement, remove the wood trim first so that you can get more accurate measurements. Measure from one top corner to the other to get the width, and measure from the top corner to the bottom corner on the same side to get the height. Take 3 width measurements at different locations and average them, and 3 height measurements at different locations and average them, and submit these averages to the contractor. Make sure you measure your sliding patio door from the inside, as the measurements will be more accurate.

This cost guide is based on installing a 6’-wide sliding patio door. It is important to keep in mind that the bigger the size of the door, the higher the cost.

Right-hand vs left-hand

Right hand and left hand are terms that help to determine the way in which the door will slide open.

While facing the sliding patio door, if the door handle is on the left hand, then this is considered a right-hand door. The right side of the door is fixed and the left side will slide open along the tracks. Opposite to that, if the door handle is on the right side of the door, then this is a left-hand door. The left side of the door is fixed and the right side will slide open along the tracks.


There are different types of material to choose from when choosing sliding patio doors. The table below illustrates the different types of materials, pros and cons, and costs of different material doors. The prices below reflect the average costs without any installation or additional fees.


Vinyl 1


Less expensive

Easy to install

Increases home value

Can warp in heat

May cause poor air seal



Good insulation

Attractive appearance

Long-term longevity if maintained properly


Requires high maintenance and care

Fiberglass 2


Many different design and style options

Requires little maintenance

Can be painted and/or stained


Cleaning products may damage the finish

Not highly durable so may crack over time



Easy maintenance


Hard to fix any dents

Susceptible to rust

Types of doors

There are different types of doors that you should consider when installing a sliding patio door. In the chart below are two of the most common types of doors on the market. The cost associated with these doors is determinant on the brand, type, and material. Typically, a 3-panel unit is more expensive than a 2 panel.


2 panels, 1 fixed

A single unit consisting of 1 panel that is fixed and 1 that is operable.

3 panels, 1 or 2 fixed

A single unit consisting of 3 panels, 1 or 2 that are fixed and 1 or 2 that are operable.

4 panels, 2 fixed 

A single unit consisting of 4 panels, 2 that are fixed and 2 that are operable.

Types of panes

A door pane is a sheet of glass or transparent material that is placed into a door. There are several different types of panes that you can choose from, illustrated in the chart below with a short description and cost.


Low-E coated

A type of reflective glass.

Used to reduce heat gain into a living space. The coating on the glass reflects the sunlight, making them energy efficient.


Impact-resistant glass

A glass that is designed to maintain a home’s integrity against strong winds, pressure, or flying debris.


High energy efficiency

Glass that has low U-factor values, meaning it can help to conserve energy and reduce your energy bills.



Argon or krypton gas is sandwiched between glass panes to provide greater insulation than regular air.



Allows the inside of your home to remain private while giving a stylish appearance. Textured glass comes in different kinds including glazed, beveled, water glass, ripple, and frosted glass.



Also called safety glass.

Often used as it breaks into small pieces when impacted instead of large pieces.


Labor and installation process

Installing a sliding patio door requires professional knowledge so that it can be installed properly, so hiring a professional to do the job is a good idea. Installing a sliding patio door includes: preparation of the opening for the new door (measuring to make sure the new door fits), applying leakproof flashing 3, caulking 4 and installing the new frame, adding extension jambs, trim, and filler strips, and then adding filling in the exterior trim to support the door.

The average cost to install a sliding patio door averages $1,400-$4,000. This price includes labor costs, which average around $65-$85 per hour and will take approximately 7 hours to install, as well as material costs including shims, silicone, and caulking. Removal and disposal of an old patio door typically costs $100-$150 and is included in the cost.


If you want your door handle and door frame to match the hardware styles and colors in the rest of your home then hardware is something that you will have to consider as an additional cost. A door handle and door frame cost anywhere from $20-$100 plus $30-$35 in labor fees.

For installation, a sliding patio door roller is needed and can cost between $15-$50 plus $30-$35 in labor fees.


Locks are a very important part of the installation process of a patio door. In comparison to the past, locks for sliding doors are much more advanced and provide a much higher level of security. A basic lock for a sliding patio door averages $10-$15 and other options are available such as auxiliary locks ranging from $20-$50. Some common lock types for patio doors include deadbolts, foot locks, and security bars.

Sliding vs folding vs french patio doors

There are different styles of patio doors to choose from. The three most popular kinds on the market are sliding, folding, and French patio doors. Each of these doors differs in the way they open and in their cost. These three types of doors are discussed below and should be taken into consideration when purchasing a patio door.

  • Folding: Allow the whole wall of glass to be folded open completely along the tracks within the floor.
  • Sliding: A patio door that slides open along the tracks.
  • French: A patio door that has two door frames that open up separately (inward or outward) using the handles.



Come in many different designs

Easy access to outside without a large opening

Tend to bring in less light



Can open up the whole door completely

Easy to open

Brings in a lot of light

Frame is heavy so moving the folding panels can be difficult



Provide lots of light due to their narrow frames

No sections to fold back so saves on space

Visually cleaner

Over time they can wear out and become more difficult to open and close


ENERGY STAR Certified patio doors

Due to advances in technology, ENERGY STAR certified patio doors make it easier to save energy than ever before.

ENERGY STAR patio doors offer:

  • Reduction in energy costs up to 12%.
  • Less condensation in cold weather and better protection from sun damage to furnishings.
  • Reduction of cold drafts.
  • Reduction of noise.

ENERGY STAR is a government-supported program that uses energy ratings and their U-factor to define their energy efficiency. The U-factor measures the rate at which heat transfers and how well the window insulations. The U-factor ranges from 0.25-1.25 and is measured using Btu/h. ENERGY STAR rates patio doors based on the gas between the panes, glass, spacer, and reinforcement. ENERGY STAR is managed by the EPA and the US Department of Energy.

ENERGY STAR doors are excellent for installation and provide many benefits. The only downfall comes with the cost. ENERGY STAR doors are quite pricey and range from $234-$1,050 depending on the material of the door and the brand.

Enhancement and improvement costs

Built-in blinds

As an additional feature, some sliding patio doors offer built-in 5 blinds, which give your home extra elegance and beauty. There are many advantages of built-in blinds such as little maintenance, easy cleaning, energy efficiency, and reduction in noise. Patio doors with blinds can be a worthwhile investment and improvement cost. Purchasing a patio door with built-in blinds can increase the cost of the patio door considerably. A patio door with built-in blinds can raise the cost by $150-$400.


Screens for patio doors are a great way to keep your family comfortable and in good health. They help to naturally cool your home and provide a reduction in energy cost during the process. Adding screens when installing new patio doors is a great benefit and will make your home look very attractive. Two of the most popular type of patio screens: sliding and retractable.  

Sliding Screens

Most people are familiar with these screen doors. They are installed on the exterior of the sliders and are only located on one side. Sliding screens for patio doors are very cost efficient and start at $175 per screen.


  • Unnoticeable and provide protection.
  • Allow fresh air to come in and keep the dirt and insects out in the process.
  • Cost efficient.


  • Need many repairs.
  • Not good for homes with pets as they can paw at the screen and it may rip or fray.

Retractable Screens

This type is gaining popularity in the recent years. They have the ability to “disappear” into a chamber when not in use. Retractable doors are on the higher end of the scale and start at roughly $400 per screen.


  • Can make them disappear into a housing chamber.
  • Increased lifetime of the screen when not in use.
  • Can be installed on any door.
  • Many color and style options.
  • Offer more screen “give” so this will prevent the screen from tearing if a pet gets to it.


  • Very expensive.
  • Can be heavy.

Pet panels

Pet panels make it easy for pets to go outside and do their business when they want. Designers have created pet panel inserts that fit in any sliding patio door without any drilling. Pet panels come in a variety of sizes depending on the size of your pet and make it very convenient to let them go outside on their own time. Patio doors can be purchased with pet panels already attached or you can purchase the insert on their own. Sliding patio doors with pet panels attached range in cost from $125-$500, depending on the size, brand, and style. Pet panel inserts can be purchased separately at a cost of $54-$350.


Door grids are a beautiful enhancement option that mimics the look of a multi-paned door. Grids are often chosen based on their attractiveness and to act as an accent piece for a home. Grids often come as part of the door and increase the door value by $50-$100.

Old door removal

Before you can install your new sliding patio door, you will have to remove your old door. Removal and disposal of the old patio door is typically included in the project cost and averages $100-$150.


Transoms are small, detailed windows that are located over or beside a door. They are good for adding extra light, with many different styles available. Transoms are quite popular and are a great improvement choice for installing a new sliding patio door. Transoms are quite costly and range from $150-$800 per window.


Adding some sidelights to your patio door can help to enhance its appearance. There are different styles of sidelights that run along the side of the patio door or some that illuminate an entrance way. Sidelights that run along the length of the door range in price between $100-$250 each. The sidelights that illuminate the entrance way are called path lights and typically cost $75-$100 each. For installation of sidelights an electrician charges an average of $65-$85 per hour for installation.

Automatic sliding doors

Enhance your new patio sliding door with an automatic sliding door system. Automatic sliding doors provide beauty, strength, and technology into one! Automatic sliding doors make it easy to open up with little maintenance and also provide a reduction in operational noise. Automatic sliding doors are on the expensive side and range from $2,000-$3,500 per door including installation fees.

Additional considerations and cost

  • Installing a patio door in a wall where no existing opening requires some modifications to the wall, plumbing, and electrical wiring. If the wall is load-bearing then only experienced carpenters or structural engineers should decide whether it can be done and how. The cost to hire a structural engineer varies depending on a few factors. For instance, the length of time in their field will increase their price. Newly graduated structural engineers will charge between $18-$26 per hour while engineers with more experience charge from $30-$42 per hour for the same work.
  • Glass sliding doors today are much more advanced than ever before. They provide more insulation, are more attractive and overall much stronger.
  • The warranty on patio doors may differ depending on the brand. Most companies, however, offer a lifetime warranty. This usually includes a lifetime warranty on the door against warping, peeling, rotting, or cracking, on the hardware and on the glass seals.
  • Warranties do not include surface fading due to sunlight, air pollutants, and atmospheric conditions or damage from improper installation, abuse, accident, negligence, or anything else beyond their control.
  • If you are required to make any changes to the framing of your patio door, a permit may be required to ensure that the required amount of ventilation is maintained and that no safety issues arise. Pay a visit to your city or town hall to get information on the permit you may need to complete the job.
  • During a home inspection, a homeowner should be informed of any repair and maintenance concerns to a patio door. They should be informed whether there are things like rot or mold and should be given the cost to adapt the existing door-opening structure.
  • Here are a few maintenance tips to keep your sliding patio door running smoothly:
  • Clean the track and rollers once or twice a month. A lot of dirt and grime get trapped in the bottom and can make it difficult to open up the door.
  • Replace the seal if it becomes torn, cracked, or broken. This will keep all of the dust and dirt out.
  • If your screen door 6 becomes damaged over time and constantly falls out then it is a good idea to replace it.
  • If you are looking to replace your sliding glass door you should do it in good weather. Once you remove the old door, your inside will be exposed to outdoor elements until the new door is put in place.
  • If you experience any issues with the flooring, siding, or interior trim due to rotting, water damage, or other reasons, this can add to the final cost. The cost of floor repairs is dependent on the size of the space and can range from $140-$850. If there are any issues with the siding the average cost to repair siding is $300. If there are any issues with the interior trim, it averages $155 to repair the trim.
  • Removing a sliding patio door can be challenging but successful with the use of the right tools. First, the interior casing and trim is removed with a screwdriver. Once the casing and trim is removed, the sliding door panel is lifted out. The stationary panel for the sliding door is then removed. After the panel has been removed the exterior trim needs to be pried off. Lastly, the door jamb needs to be cut away so the door can be removed. This can be a DIY project, however, it can be timely and challenging on your own.    


  • How much does it cost to install a new sliding glass door?

The average project to install a 6' wide sliding patio door averages $1,400-$4,000 for the project. This price includes the door, installation fees, and additional costs such as locks, blinds, and screens.

  • How much does it cost to put in a sliding door?

The average cost to put in a sliding door ranges between $1,400-$4,000. The cost fluctuates based on the type, material, window pane, installation prices, and size.

  • How much are hurricane sliding glass doors?

Hurricane sliding glass doors are a big investment but are worth it if you are in a region that experiences many hurricanes. Hurricane sliding glass doors can cost about $1,900 per door with installation fees.

  • How much is an automatic sliding door?

Automatic sliding doors provide strength, technology and a nice appearance. They are on the expensive side and range from $2,000-$4,000 per door. This price includes the door, installation fees, and additional charges such as a lock and blinds.

Was this guide helpful to you?

Remodeling Terms Cheat Sheet

Definitions in laymen's terms, cost considerations, pictures and things you need to know.
See full cheat sheet.
glossary term picture Vinyl 1 Vinyl: A synthetic plastic made from ethylene and chlorine. Vinyl has many applications in the construction industry and it is widely used in sidings, window frames, roofing and gutters, among others
glossary term picture Fiberglass 2 Fiberglass: Plastic that is reinforced with glass fibers. The fibers may be mixed randomly throughout the plastic, or come in the form of a flat sheet, or be woven into a fabric
glossary term picture Flashing 3 Flashing: Pieces of sheet metal used on roofs to cover joints, such as where the roof meets the wall, or around a chimney or skylight, to protect them and prevent water leaking through
glossary term picture Caulking 4 Caulking: A chemical sealant used to fill in and seal gaps where two materials join, for example, the tub and tile, to create a watertight and airtight seal. The term "caulking" is also used to refer to the process of applying this type of sealant
glossary term picture Built-in 5 Built-in: An item of furniture, such as a bookcase or set of cabinets, that is built directly into the structure of the room. Built-ins are therefore customized to the room and not detachable
glossary term picture Storm Door 6 Screen door: An additional door, installed outside an exterior access door, that provides insulation and damage protection during inclement weather

Cost to install a sliding patio door varies greatly by region (and even by zip code). To get free estimates from local contractors, please indicate yours.

picture related to the guide

Labor cost by city and zip code

Compared to national average
Alexandria, VA
Aliquippa, PA
Athens, GA
Atlanta, GA
Aurora, CO
Austin, TX
Bakersfield, CA
Boca Raton, FL
Boston, MA
Brooklyn, NY
Buffalo, NY
Charlotte, NC
Chula Vista, CA
Cincinnati, OH
Clinton, MD
Colorado Springs, CO
Columbia, MD
Cypress, TX
Dallas, TX
Dayton, OH
Denver, CO
Everett, WA
Flint, MI
Fort Lauderdale, FL
Fort Worth, TX
Fresno, CA
Irvine, CA
Jersey City, NJ
Las Vegas, NV
Lincoln, NE
Lincroft, NJ
Littleton, CO
Livermore, CA
Los Angeles, CA
Mesa, AZ
Milwaukee, WI
Minneapolis, MN
New York, NY
Newport News, VA
Orlando, FL
Paradise, PA
Philadelphia, PA
Phoenix, AZ
Portland, OR
Raleigh, NC
Saint Paul, MN
San Antonio, TX
San Diego, CA
San Francisco, CA
San Jose, CA
Labor cost in your zip code
Last modified:   
Methodology and sources